Fluoroscopic X-ray Unit

1 Months / 15 Minutes
1 Months / 480 Minutes
12 Months / 180 Minutes
1 Months /120 Minutes
0 Months / 60 Minutes



Fluoroscopy is a type of medical imaging that shows a continuous X-ray image on a monitor, much like an X-ray movie. During a fluoroscopy procedure, an X-ray beam is passed through the body. The image is transmitted to a monitor so the movement of a body part or of an instrument or contrast agent (“X-ray dye”) through the body can be seen in detail.[1]



  • International Commission on Radiological Protection (ICRP):
  • Publication 85: Avoidance of Radiation Injuries from Medical Interventional Procedures
  • Publication 113: Education and Training in Radiological Protection for Diagnostic and

Interventional Procedures

  • Publication 117:Radiological Protection in Fluoroscopically Guided Procedures outside the Imaging Department
  • Draft Report: Patient and Staff Radiological Protection in Cardiology
  • National Council on Radiation Protection and Measurements (NCRP) Report 168: Radiation Dose
  • Management for Fluoroscopically Guided Interventional Medical Procedures.

Society of Interventional Radiology (SIR):

  • Safety Guidelines
  • Society of Interventional Radiology Technology Assessment Committee
  • C-arm Cone-beam CT: General Principles and Technical Considerations for Use in Interventional Radiology (Robert C. Orth, Michael J. Wallace, and Michael D. Kuo, J. Vasc. Interv. Radiol. Vol. 19, No. 6, pp. 814-821, 2008)
  • Three-Dimensional C-arm Cone-beam CT: Applications in the Interventional Suite (Michael J. Wallace et al., J. Vasc. Interv. Radiol. Vol. 19, No. 6, pp. 799-813, 2008).